javax.microedition.media.control
Interface MIDIControl

All Superinterfaces:

Control

public interface MIDIControl
extends Control

MIDIControl provides access to MIDI rendering and transmitting devices.

Typical devices that are controlled with MIDIControl are internal synthesizers (software/hardware) or external hardware ports. Devices are virtual, i.e. even if there is only one physical synthesizer, all instances of MIDIControl seem to operate on its own synthesizer.

General functionality of this control is:

1. Querying current state of the device:
   • The programs that are currently assigned to each of the 16 channels
   • Volume of each channel
2. Querying the banks of the synthesizer:
   • Get a list of internal sound banks
   • Get a list of custom sound banks
   • Get the list of programs of a sound bank
   • Get the name of a specific program
3. Set the volume assigned to each channel
4. Set the bank/program assigned to a channel
5. Send short MIDI messages to the device
6. Send long MIDI messages (system exclusive)

In Java Sound terms, MIDIControl combines methods and concepts of the interfaces Transmitter, Receiver, Synthesizer, MidiChannel, Soundbank, and Patch.

In this context, the following naming conventions are used:

• A program refers to a single instrument. This is also known as a patch.
• A bank is short for sound bank. It contains up to 128 programs, numbered in the range from 0..127.
• An internal bank is provided by the software implementation or the hardware of the device.
• A custom bank is installed by an application, e.g. by loading an XMF meta file with an embedded bank.

The conception of MIDIControl is based on scope and abstraction level:

• MIDIControl has methods that are specific to the device or renderer, and do not directly relate to a specific MIDI file or sequence to be played. However, as devices are virtual, MIDIControl's methods only operate on this virtual device. On the other hand, it is also possible to get an instance of MIDIControl without providing a sequence or MIDI file; this is done by specifying a magic Locator:
  try{
Player p = Manager.createPlayer(Manager.MIDI_DEVICE_LOCATOR);
MIDIControl synth = (MIDIControl)p.getControls("javax.microedition.media.control.MIDIControl");
} catch (MediaException e) {
}
  
• MIDIControl's methods can be considered advanced, low level functionality. This has 2 implications:
  1. MIDIControl is optional, i.e. no Player instance is required to provide an implementation of it
  2. Basic media or MIDI player applications will not need MIDIControl; VolumeControl, TempoControl, and PitchControl are sufficient for basic needs.

A useful function is "Panic": immediately turn off all sounds and notes. It can be implemented using the following code fragment:

    int CONTROL_ALL_SOUND_OFF = 0x78;
    for (int channel = 0; channel < 16; channel++) {
         shortMidiEvent(CONTROL_CHANGE | channel, CONTROL_ALL_SOUND_OFF, 0);
    }
   

The implementation need not support the various query methods. This is a technical limitation, as the MIDI standard does not provide a standardized means to query the current program or the installed soundbanks. This especially applies to external MIDI ports. Optional methods must not be called if MIDIControl.isBankQuerySupported() returns false.

See Also:

Player, RateControl, TempoControl, PitchControl

Since:

BlackBerry API 4.0.0

Field Summary
static int	CONTROL_CHANGE Command value for Control Change message (0xB0, or 176).
static int	NOTE_ON Command vlaue for Note On message (0x90, or 144).

Method Summary
int[]	getBankList(boolean custom) Returns list of installed banks.
int	getChannelVolume(int channel) Get volume for the given channel.
String	getKeyName(int bank, int prog, int key) Given bank, program and key, get name of key.
int[]	getProgram(int channel) Returns program assigned to channel.
int[]	getProgramList(int bank) Given bank, get list of program numbers.
String	getProgramName(int bank, int prog) Given bank and program, get name of program.
boolean	isBankQuerySupported() Returns whether banks of the synthesizer can be queried.
int	longMidiEvent(byte[] data, int offset, int length) Sends a long MIDI event to the device, typically a system exclusive message.
void	setChannelVolume(int channel, int volume) Set volume for the given channel.
void	setProgram(int channel, int bank, int program) Set program of a channel.
void	shortMidiEvent(int type, int data1, int data2) Sends a short MIDI event to the device.

Field Detail

NOTE_ON

static final int NOTE_ON

Command vlaue for Note On message (0x90, or 144). To turn a note off, send a NOTE_ON message with 0 velocity. Alternatively, a Note Off message (0x80) can be sent.

See Also:

MIDIControl.shortMidiEvent(int, int, int), Constant Field Values

Since:

BlackBerry API 4.0.0

CONTROL_CHANGE

static final int CONTROL_CHANGE

Command value for Control Change message (0xB0, or 176).

See Also:

MIDIControl.shortMidiEvent(int, int, int), Constant Field Values

Since:

BlackBerry API 4.0.0

Method Detail

isBankQuerySupported

boolean isBankQuerySupported()

Returns whether banks of the synthesizer can be queried.

If this function returns true, then the following methods can be used to query banks:

• MIDIControl.getProgram(int)
• MIDIControl.getBankList(boolean)
• MIDIControl.getProgram(int)
• MIDIControl.getProgramName(int, int)
• MIDIControl.getKeyName(int, int, int)

Returns:

true if this device supports querying of banks

Since:

BlackBerry API 4.0.0

getProgram

int[] getProgram(int channel)
                 throws MediaException

Returns program assigned to channel. It represents the current state of the channel. During playback of a MIDI file, the program may change due to program change events in the MIDI file.

To set a program for a channel, use setProgram(int, int, int).

The returned array is represented by an array {bank,program}.

If the device has not been initialized with a MIDI file, or the MIDI file does not contain a program change for this channel, an implementation specific default value is returned.

As there is no MIDI equivalent to this method, this method is optional, indicated by MIDIControl.isBankQuerySupported(). If it returns false, this function is not supported and throws an exception.

Parameters:

channel - 0-15

Returns:

program assigned to channel, represented by array {bank,program}.

Throws:

IllegalArgumentException - Thrown if channel is out of range.

IllegalStateException - Thrown if the player has not been prefetched.

MediaException - Thrown if querying of banks is not supported.

See Also:

MIDIControl.isBankQuerySupported(), MIDIControl.setProgram(int, int, int)

Since:

BlackBerry API 4.0.0

getChannelVolume

int getChannelVolume(int channel)

Get volume for the given channel. The return value is independent of the master volume, which is set and retrieved with VolumeControl.

As there is no MIDI equivalent to this method, the implementation may not always know the current volume for a given channel. In this case the return value is -1.

Parameters:

channel - 0-15

Returns:

channel volume, 0-127, or -1 if not known

Throws:

IllegalArgumentException - Thrown if channel is out of range.

IllegalStateException - Thrown if the player has not been prefetched.

See Also:

MIDIControl.setChannelVolume(int, int)

Since:

BlackBerry API 4.0.0

setProgram

void setProgram(int channel,
                int bank,
                int program)

Set program of a channel. This sets the current program for the channel and may be overwritten during playback by events in a MIDI sequence.

It is a high level convenience function. Internally, these method calls are executed:

    shortMidiEvent( (CONTROL_CHANGE | channel), CONTROL_BANK_CHANGE_MSB, (bank >> 7) );
    shortMidiEvent( (CONTROL_CHANGE | channel), CONTROL_BANK_CHANGE_LSB, (bank & 0x7F) );
    shortMidiEvent( (PROGRAM_CHANGE | channel), program, 0 );
 

In order to use the default bank (the initial bank), set the bank parameters to -1.

In order to se a program without explicitly setting the bank, use the following call:

    shortMidiEvent( (PROGRAM_CHANGE | channel), program, 0 );
 

In both examples, the following constants are used:

    int PROGRAM_CHANGE = 0xC0;
    int CONTROL_BANK_CHANGE_MSB = 0x00;
    int CONTROL_BANK_CHANGE_LSB = 0x20;
 

Parameters:

channel - 0-15

bank - 0-16383, or -1 for default bank.

program - 0-127

Throws:

IllegalArugmentException - Thrown if any of the given parameters is out of range.

IllegalStateException - Thrown if the player has not been prefetched.

See Also:

MIDIControl.getProgram(int)

Since:

BlackBerry API 4.0.0

setChannelVolume

void setChannelVolume(int channel,
                      int volume)

Set volume for the given channel. To mute, set to 0. This sets the current volume for the channel and may be overwritten during playback events in a MIDI sequence.

It is a high-level convenience function. Internally, the following command is executed:

    shortMidiEvent( (CONTROL_CHANGE | channel), CONTROL_MAIN_VOLUME, 0);
 

where this constant is used:

    int CONTROL_MAIN_VOLUME = 0x07
 

The channel volume is independent of the master volume, which is accessed with VolumeControl. Setting the channel volume does not modify the value of the master volume -- and vice versa: changing the value of the master volume does not change any channel's volume value. The synthesizer mixes the output of up to 16 channels, each channel with its own channel volume. The master volume then controls the volume of the mix. Consequently, the effective output volume of a channel is the product of master volume and channel volume.

Setting the channel volume does not generate a VOLUME_CHANGED event.

Parameters:

channel - 0-15

volume - 0-127

Throws:

IllegalArugmentException - Thrown if channel or volume is out of range.

IllegalStateException - Thrown if the player has not been prefetched.

See Also:

MIDIControl.getChannelVolume(int)

Since:

BlackBerry API 4.0.0

getBankList

int[] getBankList(boolean custom)
                  throws MediaException

Returns list of installed banks. If the custom parameter is true, a list of custom banks is returned. Otherwise, a list of all banks (custom and internal) is returned.

As there is no MIDI equivalent to this method, this method is optional, indicated by MIDIControl.isBankQuerySupported(). If it returns false, this function is not supported and throws an exception.

Parameters:

custom - if set to true, returns a list of custom banks.

Returns:

an arrya of all installed bank numbers. Each bank number is in the range of 0..16383.

Throws:

MediaException - if this device does not support retrieval of banks

IllegalStateException - Thrown if the player has not been prefetched.

See Also:

MIDIControl.isBankQuerySupported()

Since:

BlackBerry API 4.0.0

getProgramList

int[] getProgramList(int bank)
                     throws MediaException

Given bank, get list of program numbers. If an only if this bank is not installed, an empty array is returned.

As there is no MIDI equivalent to this method, this method is optional, indicated by MIDIControl.isBankQuerySupported(). If it returns false, this function is not supported and throws an exception.

Parameters:

bank - 0..16383

Returns:

an array of programs defined in the given bank. Each program number is from 0..127.

Throws:

IllegalArgumentException - Thrown if bank is out of range.

MediaException - Thrown if the device does not suppoort retrieval of programs.

IllegalStateException - Thrown if the player has not been prefetched.

See Also:

MIDIControl.setProgram(int, int, int), MIDIControl.isBankQuerySupported()

Since:

BlackBerry API 4.0.0

getProgramName

String getProgramName(int bank,
                      int prog)
                      throws MediaException

Given bank and program, get name of program. For space-saving reasons, an implementation may return an empty string.

As there is no MIDI equivalent to this method, this method is optional, indicated by MIDIControl.isBankQuerySupported(). If it returns false, this function is not supported and throws an exception.

Parameters:

bank - 0-16383

prog - 0-127

Returns:

name of the specified program, or empty string.

Throws:

IllegalArugmentException - Thrown if bank or prog is out of range.

MediaException - Thrown if the bank or program is not installed (internal or custom), or if this device does not support retrieval of program names

IllegalStateException - Thrown if the player has not been prefetched.

See Also:

MIDIControl.isBankQuerySupported()

Since:

BlackBerry API 4.0.0

shortMidiEvent

void shortMidiEvent(int type,
                    int data1,
                    int data2)

Sends a short MIDI event to the device. Short MIDI events consist of 1, 2, or 3 unsigned bytes. For non-realtime events, the first byte is split up into status (upper nibble, 0x80-0xF0) and channel (0x00-0xF0). For example to send a Note On event on a given channel, use this line:

    shortMidiEvent( (NOTE_ON | channel), note, velocity );
 

For events with less than 3 bytes, set the remaining data bytes to 0.

There is no guarantee that a specific implementation of a MIDI device supports all event types. Also, the MIDI protocol does not implement flow control and it is not guaranteed that an event reaches the destination. In both these cases, this method fails silently.

Static error checking is performed on the passed parameters. They have to specify a valid, complete MIDI event. Events with type < 0x80 are not valid MIDI events (-> running status). When an invalid event is encountered, an IllegalArugmentException is thrown.

Parameters:

type - 0x80..0xFF, excluding 0xF0 and 0xF7, which are reserved for system exclusive

data1 - for 2 and 3-byte events: first data byte, 0..127

data2 - for 3-byte events: second data byte, 0..127

Throws:

IllegalArgumentException - Thrown if one of the parameters is out of range.

IllegalStateException - Thrown if the player has not been prefetched.

Since:

BlackBerry API 4.0.0

longMidiEvent

int longMidiEvent(byte[] data,
                  int offset,
                  int length)

Sends a long MIDI event to the device, typically a system exclusive message. This method passes the data directly to the receiving device. The data array's contents are not checked for validity.

It is possible to send short events, or even a series of short events with this method.

Parameters:

data - array of the bytes to send

offset - start offset in data array

length - number of bytes to be sent

Returns:

the number of bytes actually sent to the device or -1 if an error occured

Throws:

IllegalArgumentException - Thrown if any of the given parameters is not valid.

IllegalStateException - Thrown if the player has not been prefetched.

Since:

BlackBerry API 4.0.0

getKeyName

String getKeyName(int bank,
                  int prog,
                  int key)
                  throws MediaException

Given bank, program and key, get name of key. This method applies to key-mapped banks (i.e. percussive banks or effect banks) only. A return value of null means that the specified key is not mapped to a sound. For melodic banks, where each key (=note) produces the same sound at a different pitch, this method always returns null. For space-saving reasons, an implementation may return an empty string instead of the key name. To find out whicih keys in a specific program are mapped to a sound, iterate through all keys (0-127) and comare the return value of getKeyName to non-null.

As there is no MIDI equivalent to this method, this method is optional, indicated by MIDIControl.isBankQuerySupported(). If it returns false, this function is not supported and throws an exception.

Parameters:

bank - 0-16383

prog - 0-127

key - 0-127

Returns:

name of the specified key, empty string, or null if the key is not mapped to a sound.

Throws:

IllegalArgumentException - Thrown if bank, prog or key is out of range.

MediaException - Thrown if the bank or program is not installed (internal or custom), or if this device does not support retrieval or key names

IllegalStateException - Thrown if the player has not been prefetched.

See Also:

MIDIControl.isBankQuerySupported()

Since:

BlackBerry API 4.0.0